news
28
Apr

HYDAC’s guide to filters and filter elements.

The incredibly wide choice of HYDAC filtration products calls for a clear part identification system, allowing buyers to always order the right replacement components easily. Although some buyers might be overwhelmed with the long part codes made of letters, digits, and signs altogether, it turns out that the model identification code created by HYDAC is...
Read More
18
Jun

New hall for cylinder overhaul operational

The 140-meter industrial hall for cylinder overhaul in Apeldoorn is ready for use.Today HYCOM, daughter of HYDAC, is moving the cylinder revision department to the extra hall at Kayersdijk in Apeldoorn, The Netherlands.140 Meters long, 20 meters wide, 9 meters high, with a lifting capacity of more than 100 tons and an energy supply of...
Read More
06
Jun

Another acquisition for HYDAC B.V. in Helmond

Large expansion for market leader in hydraulic components and systems through the addition of electric drive & control technology from Elma B.V. Following previous acquisitions by HYDAC of HYCOM B.V. and Hydrodynamics B.V. in 2013, on June 5, 2019 a signature was made for the acquisition of Elma B.V. in Soesterberg by Thomas Kwaks, CEO...
Read More
29
Apr

HYDAC Netherlands proudly presents its new Offshore short movie

HYDAC Netherlands proudly presents its new Offshore short movie. From The Netherlands, HYDAC is worldwide leading in hydraulic systems and components for offshore and offshore wind applications. We manufacture our own brand components and assemble motion and control systems. We deliver diesel driven power units and hydraulic systems & components for Offshore Access Systems, Monopile...
Read More
23
Apr

HYCOM expands in Apeldoorn with an industrial hall for cylinder overhaul

After 34 years: back to the place where it once all started. HYCOM, subsidiary of HYDAC BV, is committed to growth. Thanks to the proven reliability to their customers, HYCOM has continued to grow and will focus on cylinder revision from 2019 onwards. The Dutch HYCOM has been part of the HYDAC-Group since 2013. Cylinder...
Read More
15
Apr

The Power of cooling

Expansion into larger coolers for power generation highlight expanded global R&D. Article By Roberta Prandi. Raise your hands, those who think there is not much work going on behind the development and manufacture of coolers. I am reasonably sure at least a few hands are rising. A recent visit to the Cooling System division of Hydac...
Read More
04
Apr

New set of overflow trolleys by HYCOM

A European aircraft manufacturer selected HYCOM to build a new set of overflow trolleys to support their fuel tests. For HYCOM it was the first time that the overflow trolleys were made. The existing design was improved to satisfy the specific needs regarding health and safety at the aircraft assembly line. Today we shipped the...
Read More
07
Feb

Time to say goodbye to time-consuming quotations and hello to direct orders!  

It’s time to say goodbye to time-consuming quotations and hello to direct orders! We are proud to announce that HYDAC has joined Royal IHC’s pioneering e-commerce platform as one of its trusted global partners. The global maritime e-commerce platform ‘ShipSupport’ makes it easier for our customers to order all their required parts online for their...
Read More
15
Jan

Artwork HYCOM at Exposition in Zwijndrecht, Netherlands!

At the end of 2018, artist Wim Noordam paid a visit to HYCOM in Apeldoorn, for taking pictures of our hydraulic systems under assembly. He used these images as a basis for his graphic work for an exhibition with art of all kinds of subjects. In addition to HYCOM, more than twenty companies and organizations...
Read More
09
Apr

HYDAC The fourth industrial revolution

We continue to innovate at the forefront of industry to ensure our customers’ needs are met. The fourth industrial revolution or, put simply, “Industrie 4.0” is based on the availability of all relevant information in real time by connectivity. Linking people, objects and systems creates cross-company added value networks that are dynamic, real-time optimised and self-organising. HYDAC will...
Read More
HYCOM Hydraulic power pack for assembly line in container
19
Feb

HYCOM delivers Hydraulic power pack for assembly line in container

With fixed hangar housed hydraulic systems it is not always possible to place the hydraulic pump unit and accessories in a basement. For these situations, Hycom has developed a “stand alone” unit based on a container.
Read More
HYDAC Power Pack
14
Feb

Hydraulic HYDAC power pack in 3-fold ready for transport

Custom made and ready for transport to West European dredging/offshore wind contractor; hydraulic HYDAC power pack in 3-fold.
Read More
Hydac-Diesel-aangedreven-hpu_enschede
18
Jan

HYDAC prepares new Hydraulic Power Packs for transport

HYDAC’s facility in Enschede develops diesel-driven Hydraulic Power Packs to power rotative as well as linear equipment. This hydraulic system is used as a power source for operating winches, cylinders or rotating actuators, for example.
Read More
30
Dec

Hydraulics Gemaal Leemans again up to date for the coming decades through revision by HYDAC

Pumping station Leemans at Den Oever is one of two pumping stations that are built for the reclamation of the Wieringermeer. In 1994 the pumping station was renovated and a hydraulic installation was delivered under the HYCOM flag. The pumping station can be closed and opened through hydraulic cylinders. In 2017 HYDAC started the revision...
Read More
Fuel system
27
Nov

Hycom finalizes Jet Fuel Station in Asia

Hycom has recommissioned the Jet Fuel Station Farm in Asia in November 2017. This installation associates a containerized loading and unloading group (pump, filter, and meter) with underground reservoirs, forming a fully functional and autonomous aviation fuel farm.
Read More
25
Sep

Hydac introduces new active heave compensation system at Offshore Energy 2017

Save up to 85% on energy consumption The new AHC system from Hydac can be interesting for you when: – you are looking to save on weight, maintenance and energy consumption of your system – you have an existing crane which you want to convert to an active heave system Gotten curious? Let us inform...
Read More
RAT test tool performing a RAT test on a B787 during aircraft maintenance
21
Jul

RAT test on B787 aircraft

Together with a European Airline Hycom has developed a RAT ground test tool for the Boeing B787 RAT test. The tools HRT02 and HPM are mentioned in the Boeing B787 AMM. The biggest advantage of this tool is the low weight of only 18 kgs. BENEFITS: – Easy to install – Simple to operate –...
Read More
Hydraulic cylinder and manifolds
28
Apr

Visit Hydac at the Europort 2017

This year, Hydac will be present at the Europort at the AHOY in Rotterdam again. This exhibition focuses on the maritime market and takes place from 7 up and until 10 November 2017 in Rotterdam. We gladly invite you to visit our stand (4201) to get acquainted with the possibilities that Hydac has to offer....
Read More
Control panel and HGPU
26
Apr

Visit Hycom during the Interairport 2017

Hycom will be present at the Interairport show in Munich again. The exhibition is focused on airport equipment and takes place from 10 up and until 13 October 2017 in Munich. We gladly invite you to our booth (A6-326) to see what Hycom has to offer. Safe and reliable air transport demands precise aircraft maintenance....
Read More
24
Apr

Visit Hydac at the Offshore Energy 2017

This year, Hydac is also present at the Offshore Energy at the RAI in Amsterdam. This exhibition, focused on offshore energy, takes place on the 10th and 11th of October 2017 in Amsterdam. We kindly invite you to our stand (1.077A) to get acquainted with the possibilities that Hydac has to offer. As a company...
Read More